AEG Cylinder's

​

Our cylinder's are made from high quality stainless steel. This is far more resilient than aluminium or brass.

The cylinders go through a final process that gives them a mat finish which helps keep a consistent amount of lubrication on its surface. This aids the smooth movement of the main O-ring and leads to increased consistency.

 

The cylinders are ported in the familiar 1/2, 3/4, 4/5, Tip and Full cylinder.

These equate to the port positions being E 36.0 MM, D 43.0 MM, C 52.0 MM and B 62.0 MM from the front end of the cylinders.

​

Custom port positions are available on request.

​

To achieve an approximate 2 to 1 barrel and cylinder ratio (with AOE corrected) we suggest

​

Barrels between 110-220  E

Barrels between 210-240 D

Barrels between 230-280 C

Barrels between 275-365 B

Barrels between 365-450 A

Barrels between 440-500  non ported

Barrels over 500 may need a bore up type cylinder.

​

These are guide figures and you may find your build performs better with a cylinder one size up or down from those listed here

​

​